HOW LONG WILL MY WELDING JACKET LAST?

Like any product, there is a certain window of depreciation that a welding jacket has, which is based on the amount of wear it receives. Over time, the features of the jacket are going to wear down. With enough time, the flame and heat resistance of the personal protective equipment will wear out and leave you vulnerable.

Most welding jackets are designed to last about 3-5 years with regular wear. That means you’d be welding 2-3 times per week. If you are wearing your welding jacket every day, then you may only get 2-3 years of life out of it. On the other hand, if you’re only an occasional welder, the jacket you choose today could protect you for more than a decade.
Read more at: Weldingrodeoaz
Contact me at: Gravatar or About.me
#weldingrodeoaz #bestweldingjacket #weldingrodeo

HOW TO FIND THE RIGHT SIZE OF WELDING JACKET

e1617-00qruvwxio6wg_mfi Most welding jackets are given a standard size (S, M, L, XL, etc.) that is based on the chest measurement. To obtain an accurate chest measurement, you’ll need to wrap the tape measure under your armpits, around the fullest part of the chest. You want the tape measure to be snug, but not so tight that it is leaving red marks on your skin or constricting your breathing.

Some guys tend to puff out their chest or stand awkwardly during the measurement. This will throw off the accuracy, so just stand normally. Take the reading and then compare it to the sizing chart of your preferred welding jacket so that you order the correct size for your needs.

The Belly Exception:

If you haven’t seen a six-pack since forever and your belly is a bit larger than your chest, then you’ll want to substitute a belly measurement for the chest measurement. Otherwise, you may find it a little difficult to zip or button up your jacket when it comes time to weld.

To obtain the belly measurement, follow the same steps as the chest measurement. The only difference is that you’ll run the tape across the belly button instead.

Do not measure at the hip bones. Men tend to carry more weight in the belly than the hip, which will throw the measurement off. The belly button sits just above the hips.

The Best Welding Jackets & Coats

Welding jackets are designed to protect your body and arms from the heat, sparks and spatter from welding. The challenge is to find an effective jacket that is really protective without being too hot or heavy to wear for long periods. Some of the industry’s leading names – such as Miller, Lincoln, and others – have all come up with some great designs for both men and women that deliver in terms of style, comfort and protection.

Below you’ll find the best welding jackets on the market today. With all of them, the pros far outweigh the cons, so you’re guaranteed to be safe and comfortable whichever jacket you choose!

1. Miller Welding Jacket, Pigskin Leather (Black)The GoodThe designers of this jacket have come up with a stylish, tapered and athletic fit, meaning that it looks good and fits well too. Putting on and taking off the jacket is a breeze, thanks to the satin lining which offers smooth movement. In addition, expandable leather in key places just makes it even easier and more comfortable to wear this jacket for long periods of time.

This leather isn’t cheap; it’s made from premium grade pigskin which has been stitched with Kevlar thread to give high levels of strength, durability and protection. In fact, the protection is really impressive, with a flame-resistant cuff around the wrist area, and a stand-up collar to protect the neck during out of position or overhead welding – both of which are features that you won’t necessarily find on cheaper models.

The BadYou should be careful if you want to wear this jacket for overhead welding. Although it is suitable for this purpose, there have been reports of sparks working their way between the buttons and down inside the pockets, which isn’t ideal. If you have anything flammable in the pockets or if you’re wearing anything that will burn easily, then this could land you in a lot of trouble.

ConclusionBy all accounts, this is a top quality welding jacket from one of the biggest names in the industry. It’s seriously impressive, as long as you don’t put anything flammable in the pocket!

Revco BSX Welding Jacket

First on the list is the Revco BSX Welding Jacket with an average customer rating of 4.4-Stars. This Revco welding coat claims to give great coverage for different body types, built and height. Hence, it is perfect for tall people, even users with long limbs, considering the 30-inch length of the jacket.

Moreover, this jacket boasts an adjustable stand-up collar, providing utmost protection for the upper area of the user’s neck. It also features a very comfortable design, giving an effortless mobility, which is an important feature that a potential buyer should always look for. This welder jacket has arms and shoulders made of satin lining, making it more comfortable than ordinary jackets.

Additionally, there are fastening snaps that enhance the overall design, allowing the user to move flawlessly, including the effortless wearing and removing of the garment. In fact, the overall design is very rare when compared to other welding clothing on the market. What is more, the Revco BSX has stitching with flame-resistant Kevlar finish, resulting in added durability and strength.

All in all, this welding jacket has a flame-resistant cotton construction with extended length coverage, including adjustable waist straps and cuff. Besides its unique collar design, it also features double scribe and inside pockets for extra tool space. For heavy duty applications and hot climate, the lining of this garment makes it quite thick, although it certainly offers an exceptional protection level. It is still a value for money and comes available in small to extra-large sizes.

How to Choose Right Welding Jacket For Your Job

From the above, it can be safely deduced that a leather jacket is much more favorable than a cotton jacket when performing high end and heavy-duty metal work. Cotton jackets should be used when performing medium or light welder work.

Based on over one-decade experience on handling all kinds of welding task ranging from the lightweight simple metal fabrication work to a high end heavy industrial welding task I can confidently say that these are key and salient features to be considered before choosing the welding jacket that suits your taste and meets up your job demand. They shall be discussed below.

Material

The stuff your welding jacket is made of should be the first thing you consider before selecting your jacket, as you might have realized during reading this blog, jackets are majorly made using flame resistant cotton and leather although there are a lot of jackets in the market that combines the two materials.

If you engage in heavy-weight welding work like working on a ship, high-end mig and tig welding etc. then your surest bet is to go for a jacket made majorly from leather as it is safer although it can be a little hard for you to move about. If you also work in a very cool climate a leather jacket is also better.
If you work on lightweight welding like stick welding and what have you, you might need nothing more than a jacket made majorly from cotton, the material is strong enough to protect you against heat, ultraviolet light etc. that you might get exposed to on your work.

Comfortability

Like in all kind of job if you are not comfortable there is no way you can give your best, believe me, you as a welder your comfortability on your apparel is very important, in choosing your jacket it is advised that you choose the one that offers maximum protection and maximum comfortability combined.

The work of a welder is hard enough the last thing you want to worry yourself about is your discomfort. From experience cotton jackets being lighter are more comfortable than a leather jacket.

Lincoln Electric K2989 Heavy Duty Leather Welding Jacket

The Good

As you’d expect from such a well-known brand like Lincoln Electric, this jacket really delivers in terms of strength and protection. In terms of strength and durability, it’s been crafted with triple stitched seams – not only do these make the jacket stronger, but they also prevent fraying. This will only serve to increase the longevity of this jacket, so you won’t have to spend out on another one anytime soon. With regards to protection, it’s got everything from the wrists to the necks covered. Longer torsos are protected with a long 32 inch body; the flip-up collar gives optional neck protection; the zipper and snap closure on flame-resistant and weather-resistant leather securely protect you from both spatter and the elements.

The Bad

As you can see, this is a pretty sturdy, heavy duty jacket. As a result, some wearers might find it a little heavy. Its thick material and sturdy nature mean that it can also be hot and uncomfortable to wear in warm weather.

Conclusion

Rather impressively, this jacket gives fantastic protection in every sense of the word. As a result, it’s excellent value for money and you’ll definitely get your money’s worth from it!

QEES Genuine Leather Welding Jacket 103CM Long Heavy Duty Welding Clothes Velcro Coat Review

Made from heavy duty genuine cow leather, this brown welding jacket offers protection to the welder up to his knee level. It was designed with a high collar, adjustable straps and double stitched seams.

The jacket also has a large pocket to fit in some small tools which you might need as you perform your welding task. Protecting the arms and torso from welding spatter and heat.

Pros
It offers great protection at a very affordable price. The arms and the torso are well protected against welding spatter and heat. The high collar protects the neck region and to cap it all it was not made exclusively for welders. It can also be used by mechanics and blacksmiths. It is also highly durable.

Cons
In addition to its somehow foul smell, it is not suitable for heavyweight welding work. Moving about in the jacket can also be hard.

Verdict.

The designers of this leather jacket hold safety in high esteem, it is safe to say that this is a perfect blend of affordability and protection. The foul smell could be neutralized by spraying deodorants on the jacket.

In a bid to clean it you shouldn’t make the same mistake I made by putting it inside the water as this kind of deformed the jacket. A little brushing will do wonders in cleaning it.

Hobart 770568 Flame Retardant Cotton Welding Jacket Review

This Dark Gray lightweight jacket with long sleeves was made using flame retardant cotton, it features no lining, and heavy-duty snaps providing excellent coverage. It weighs 1 pound and a size of 9.9 x 1.3 x 1.3. It also features a pocket on the inside of the jacket.

Pros
The jacket is light-weight which affords for easy mobility, highly suitable for light and medium construction work, it is most suitable for tack welding, grinding and MIG. The price is also pocket-friendly.

Cons
It is most ideal in warmer temperatures and not colder temperatures. You cannot count on this jacket if your work will get you exposed to hot sparks as it is ineffective in deflecting them.

Verdict.

Hobart has delivered yet another cotton jacket that provides reasonable protection at a pocket-friendly price, although I have used this jacket for all kinds of welding from light scale domestic welding to commercial welder work and I have been protected. I will not recommend it for heavy welding work because of its cotton material.

Tips for Washing your jacket

While it has been argued that cleaning of a jacket is not necessary since it is used for work and would always accumulate grime I strongly believe that to maintain its durability it is really important for the jackets to not only be cleaned but to also be cleaned properly.

The dirtier the jacket gets the stiffer it becomes and the stiffer it becomes the more it loses its comfort, dirty jackets also produce a rather repugnant smell.

To remove grime from your leather jacket, saddle soap can be effectively used, but to maintain the sturdiness of the jacket, it is better you apply some leather conditioner after the cleaning. You should not soak a leather jacket inside water it can have a negative effect on the leather, simply using little water to wipe the surface should suffice.

Cotton jackets, on the other hand, can be effectively washed just as we wash our regular clothes just that it is advisable that you add 3 to 4 spoon of fabric softener before drying, as should be expected drying takes more time.

You should not wash your welding jacket in a washing machine, and if your jacket is old and maybe you are not ready to get a new jacket, you can rub alcohol before beginning the washing process.

10 Best Welding Jacket and Buying Guide

Say what you may but there is no denying the fact that being a welder exposes you to an array of dangers, the onus is on you to select the best welding jacket to protect you against the work-related hazard.

Prevention they say is better than cure, is there any better way to protect your body from wielding related hazards than by wearing safety apparels that is both affordable and effective in playing the much desired “protection role.”

To effectively protect against hazards, welders must insist on welding jackets made from suitable materials which would make the jacket at least fireproof.

Sit back and fasten your seat belt while I take you on a short trip to discover to great extent things or features to look out for while selecting the best welding jacket. For this purpose, ten welding jackets shall be reviewed.